• Lay brick, block, stone, and architectural masonry units to line and level
• Mix, spread, and finish mortar; strike and tool joints to specification
• Read blueprints, elevations, and masonry details
• Cut and shape units with saws, splitters, and hand tools
• Install flashing, weep holes, ties, lintels, and reinforcement
• Perform repointing, restoration, chimney, and repair work
• Build and work safely from scaffolding, swing stages, and mast climbers
• Maintain quality of appearance, alignment, and plumb across the wall

– Perform general labour tasks as assigned.
– Load, unload, and move materials safely.
– Maintain a clean and organized work environment.
– Follow workplace safety procedures and company policies.
– Assist team members with daily operational tasks.

• Safely transport passengers along assigned routes and schedules
• Conduct daily pre-trip and post-trip inspections and report defects
• Maintain accurate on-time performance and route logs
• Manage passenger conduct and enforce safety rules on board
• Operate wheelchair lifts and securement systems where equipped
• Follow all MTO, board, and company safety and reporting procedures
• Handle emergency and evacuation procedures if required
• Keep the vehicle clean, fuelled, and ready for service

• Operate dump trucks, straight trucks, roll-offs, or float trucks safely
• Haul aggregate, soil, asphalt, equipment, or materials to and from job sites
• Perform daily pre-trip and post-trip circle check inspections
• Complete and maintain accurate logs, tickets, and delivery paperwork
• Secure, strap, tarp, and verify loads before departure
• Assist with loading/unloading and general labour between runs
• Communicate with dispatch on delays, route changes, and site conditions
• Comply with MTO regulations, HOS rules, and weight restrictions

• Load and unload trailers, sea containers, and delivery trucks by hand and with
• equipment
• Sort, scan, and stage freight by destination, customer, or SKU
• Build, stack, and wrap skids safely and to weight distribution standards
• Verify shipments against packing slips, BOLs, and manifests
• Report damaged, short, or over shipments to the supervisor
• Operate pallet jacks, walkie riders, and dock equipment
• Keep dock doors, staging lanes, and the yard clear and safe
• Follow lockout, dock lock, and trailer safety procedures

• Pick orders accurately using RF scanners, pick lists, or voice-pick systems
• Pack, seal, label, and stage orders for shipment
• Verify product codes, quantities, and order accuracy before dispatch
• Build, wrap, and shrink-wrap skids to standard
• Perform quality checks and flag damaged or incorrect product
• Restock pick faces and assist with cycle counts and inventory
• Keep aisles, packing stations, and work areas clean and organized
• Meet daily productivity and accuracy targets

• Perform general repairs — drywall, painting, doors, hardware, flooring, fixtures
• Basic plumbing repairs: faucets, toilets, drains, minor leaks
• Basic electrical work: lighting, ballasts, switches, receptacles (within scope)
• Complete scheduled preventive maintenance tasks and log results
• Respond to work orders and tenant/client service requests
• Assist with HVAC filter changes and equipment servicing
• Maintain grounds, common areas, and exterior spaces; seasonal snow and salt duties
• Track supply and parts inventory; report items needing outside contractors

• Erect structural steel beams, columns, joists, and decking to drawings
• Rig, signal, and guide loads with cranes, hoists, and forklifts
• Bolt up, torque, plumb, and align steel members
• Install reinforcing steel (rebar), mesh, and embeds
• Install metal decking, handrails, stairs, and miscellaneous metals
• Perform tack welding, burning, and cutting as required
• Set up and inspect fall arrest systems, lifelines, and anchor points
• Dismantle temporary bracing and rigging on completion

• Read and interpret fabrication drawings, cut lists, and assembly detailsMeasure, mark, cut, drill, punch, and shape metal stock to specification
• Fit up and tack weld components into assemblies within tolerance
• Operate shears, brakes, iron workers, band saws, drill presses, and plasma/oxy-fuel
• cutters
• Use squares, levels, tapes, and calipers to verify dimensions and alignment
• Perform grinding, deburring, and finishing prep
• Conduct quality checks against drawings before release to welding or paint
• Maintain tools, machines, and a clean work area

• Weld components to blueprint and WPS specifications
• Set up and adjust welding machines for material type, thickness, and processRead and interpret blueprints, weld symbols, and shop drawings
• Prepare joints — cut, grind, bevel, clean, and fit up material
• Inspect welds for quality, penetration, and defects; repair as needed
• Operate plasma cutters, torches, grinders, and shop hand tools
• Maintain equipment and keep the work bay clean and organized
• Follow shop safety, hot work, and ventilation procedures

• Install sod, plants, trees, shrubs, and garden beds
• Lay interlocking stone, pavers, and retaining wall unitsGrade, level, and prepare soil; spread topsoil, mulch, and aggregate
• Operate mowers, trimmers, edgers, blowers, and small compaction equipment
• Prune, weed, water, and maintain planted areas
• Load and unload materials, tools, and equipment from trucks and trailers
• Clean up job sites at the end of each day
• Seasonal snow clearing, shovelling, and salting where applicable

• Operate excavators, backhoes, skid steers, wheel loaders, bulldozers, and rollers
• Excavate, grade, backfill, and level to grade stakes and drawingsLoad and unload materials into trucks and hoppers
• Perform daily pre- and post-operation equipment inspections and log defects
• Complete routine greasing, fluid checks, and minor field maintenance
• Work safely around ground crews, utilities, and locate markings
• Assist ground crew when not operating equipment

• Load, unload, and move materials, tools, and equipment around the site
• Assist carpenters, masons, framers, and other tradespeople as directed
• Site cleanup, debris removal, and keeping work areas clear and safe
• Operate hand and power tools (jackhammers, drills, saws, compactors)
• Mix, pour, and spread concrete, mortar, and asphalt
• Erect and dismantle scaffolding, barricades, and temporary structures
• Set up and take down traffic control and safety signage
• Follow all site safety procedures and report hazards immediately

• Supervise and direct daily activities of labourers, tradespeople, and subcontractors
• Read and interpret blueprints, drawings, and specifications
• Plan daily work sequences, assign tasks, and manage crew productivity
• Coordinate material deliveries, equipment, and tool requirements
• Conduct toolbox talks, safety inspections, and enforce OHSA complianceComplete daily site reports, timesheets, and progress documentation
• Troubleshoot on-site issues and escalate delays or scope changes
• Train and mentor junior crew members

– Conduct outbound cold calls to engage with potential clients.
– Assist in managing client accounts and maintaining strong relationships.
– Participate in outdoor marketing campaigns to promote the brand and services.
– Support the team in creating marketing materials and presentations.
– Work collaboratively to brainstorm innovative sales strategies.

– Operate manual transmission trucks to transport goods safely and efficiently.
– Follow pre-determined routes and delivery schedules.
– Conduct routine vehicle inspections to ensure operational safety.
– Maintain accurate delivery logs and documentation.
– Communicate effectively with dispatchers and the logistics team.

– Deliver parcels to customers’ locations promptly and professionally.
– Handle packages with care, ensuring they arrive in perfect condition.
– Maintain accurate delivery logs and communicate with the logistics team.
– Provide excellent customer service and address any delivery-related concerns.
– Follow all traffic laws and company guidelines.

– Perform high-quality MIG and TIG welding on various metals.
– Read and interpret technical blueprints and project specifications.
– Operate and maintain welding tools and equipment safely.
– Inspect finished work for quality and compliance with standards.
– Collaborate with the team to complete projects on time.

– Assist with construction and site preparation.
– Load and transport building materials.
– Operate basic hand and power tools.
– Maintain a safe and organized job site.
– Follow project instructions and safety regulations.

– Manage phone calls, emails, and correspondence.
– Schedule appointments and maintain office records.
– Prepare documents and reports.
– Support staff with administrative duties.
– Maintain organized filing systems.

– Respond to customer inquiries professionally.
– Resolve customer concerns efficiently.
– Maintain accurate customer records.
– Process orders and provide product information.
– Deliver excellent customer service at all times.

– Prepare and cook menu items according to recipes.
– Maintain food quality and presentation standards.
– Ensure kitchen cleanliness and sanitation.
– Monitor food inventory and report shortages.
– Follow food safety and hygiene regulations.

• Oversee daily operations across production, warehouse, logistics, or field teams
• Develop, document, and enforce operational SOPs and workflows
• Manage departmental budgets, forecasts, and cost control initiatives
• Lead, coach, and performance-manage supervisors and front-line staff
• Track and report on KPIs — productivity, quality, safety, and delivery metrics
• Plan staffing levels, scheduling, and resource allocation
• Drive continuous improvement and lean/process optimization initiatives
• Ensure compliance with OHSA, employment standards, and company policy
• Manage vendor, supplier, and client relationships
• Report operational performance to senior leadership

– Operate forklifts safely and efficiently.
– Load, unload, and transport materials.
– Organize inventory within the warehouse.
– Perform daily equipment inspections.
– Follow warehouse safety procedures and regulations.

• Take customer orders at the counter, drive-thru, and via POS system
• Prepare food and beverages to brand standards and recipe specifications
• Operate grills, fryers, ovens, and food prep equipment safely
• Assemble and package orders accurately and quickly
• Handle cash, debit, and credit transactions and balance the till
• Maintain food safety, temperature logs, and sanitation standards
• Clean the dining area, kitchen, equipment, and washrooms
• Restock supplies, condiments, and inventory
• Resolve customer questions and concerns courteously

– Operate production equipment and machinery.
– Assemble, package, and inspect products.
– Maintain a clean and organized work area.
– Follow production schedules and quality standards.
– Adhere to workplace health and safety procedures.

• Greet visitors, clients, and contractors professionally and manage sign-in
• Answer, screen, and direct incoming calls on a multi-line phone system
• Manage the general email inbox and route enquiries appropriately
• Book and coordinate meeting rooms, appointments, and calendars
• Receive, sort, and distribute mail, courier packages, and deliveries
• Maintain visitor logs, security passes, and reception area presentation
• Perform data entry, filing, scanning, and document preparation
• Provide general administrative support to office staff as needed
• Order office and kitchen supplies

– Receive, inspect, and verify incoming shipments.
– Prepare and process outgoing orders.
– Maintain accurate inventory records.
– Coordinate with warehouse and logistics teams.
– Ensure shipping and receiving procedures are followed.

• Process accounts payable and accounts receivable transactions
• Prepare and issue invoices; follow up on outstanding collections
• Perform bank, credit card, and vendor account reconciliations
• Assist with payroll preparation, timesheets, and employee records
• Maintain the general ledger and support month-end close
• Prepare expense reports, journal entries, and financial summaries
• Manage filing systems, correspondence, and document control
• Order office supplies, coordinate vendors, and support general office operations
• Support HR administration, onboarding paperwork, and scheduling